Home > CCIE Enterprise Infrastructure > CCIE Enterprise Infrastructure Discussion

CCIE Enterprise Infrastructure Discussion

CCIE Enterprise Infrastructure Written & Lab Exam : Discussion & Sharing

All old posts will be archived automatically.
Sellers & Scammers no allowed.

  1. admin
    May 23, 2020 at 12:00

    Lets begin with CCIE Enterprise Infrastructure Discussion

  2. Dalton
    May 25, 2020 at 13:09

    What are the exam topics of CCIE Enterprise Infrastructure?

  3. Liam
    May 26, 2020 at 16:10

    Is EI practice lab available?

    • Jerry
      June 6, 2020 at 14:10

      Full Lab not available,
      DMVPN & SDWAN Labs available

      • Kadir
        June 8, 2020 at 06:12

        Please share labs.

  4. Rayon
    May 26, 2020 at 18:39

    Anybody have the IOS image for Cisco Switch 9300 series ?

    If someone have pls share.

    • Weston
      May 27, 2020 at 16:25

      I think only supportive images ares available.

    • Declan
      May 29, 2020 at 19:43

      New images wont be available so soon. It will take time to be available in the market.

  5. John
    May 28, 2020 at 08:25

    What devices(physical / virtual) are required which can be used/available for making the study Labs?

  6. Andrew
    May 29, 2020 at 11:45

    What are the differences between old and new labs?

    • Max
      May 29, 2020 at 15:27

      Old labs were virtual and can work on any simulator, But new labs required physical devices.
      This is one of the biggest difference.

    • Justin
      May 30, 2020 at 07:02

      New labs will be more difficult than old labs because it contains 40% new topics.

  7. Scott
    May 31, 2020 at 15:29

    SDWAN & SD-access and DNA are new introduction in CCIE Enterprise Infrastructure and it contains 40% of total coverage.

    • Vincent
      May 31, 2020 at 20:15

      Can you explain these topics.

      • surgio
        June 1, 2020 at 13:29

        A software-defined wide-area network (SD-WAN), is a network that is abstracted from its hardware, creating a virtualized network overlay. Operators can remotely manage and quickly scale this overlay, which can span over large geographical distances.

      • daijiro
        June 3, 2020 at 10:17

        Cisco Software-Defined Access (SD-Access) is the industry’s first intent-based networking solution for the Enterprise built on the principles of Cisco’s Digital Network Architecture (Cisco DNA). Cisco SD-Access provides automated end-to-end segmentation to separate user, device and application traffic without redesigning the network.

  8. Huan
    June 1, 2020 at 07:34

    What all things are required for setting up new lab?

  9. Teddy
    June 1, 2020 at 10:03

    What is SD-WAN and SD-Access?

    • Ayaki
      June 2, 2020 at 08:57

      Both SD-WAN and SD-Access are the ways to approach SDN terminology by taking DNA architecture. SD-Access as name suggested Software defined Access for changing the architecture of the LAN networks while SD-WAN as software defined WAN which can automate and may be next generation networks over the MPLS/VPLS.

    • Jesse
      June 5, 2020 at 09:00

      SD-Access has the components like DNA-Center which acts as a controller for control plane and while data plane is still with the devices in the network.

      Similarly for the SD-WAN Viptela architecture, there are three controllers which can be on the cloud or on-prem deployment and can have the control plane. All devices in the SD-WAN architecture works on the zero trust model and to maintain the trust between them they need to create the DTLS/TLS tunnels and exchange the certificates which are preloaded on the devices.

  10. Stella
    June 2, 2020 at 14:17

    Can anybody explain the concept of fabric domain?

    • chikafusa
      June 3, 2020 at 12:04

      Fabric domain is for different Administrative/policy domains.In the fabric domain, the control-plane device acts as the map-server and the map-resolver. Enables the control-plane device with IPv6 LISP map resolver capabilities.

    • Jose
      June 5, 2020 at 17:39

      Fabric technology is an integral part of SD-Access, provides wired and wireless campus networks with programmable overlays and easy-to-deploy network virtualization, permitting a physical network to host one or more logical networks as required to meet the design intent.

    • Dexter
      June 6, 2020 at 14:17

      The SD-Access solution combines the Cisco DNA Center software, identity services, and wired and wireless fabric functionality. Within the SD-Access solution, a fabric site is composed of an independent set of fabric control plane nodes, edge nodes, intermediate (transport only) nodes, and border nodes. Wireless integration adds fabric WLC and fabric mode AP components to the fabric site. Fabric sites can be interconnected using different types of transit networks like IP Transit, SD-WAN Transit (future) and SD-Access transit to create a larger fabric domain.

  11. Isaac
    June 3, 2020 at 17:33

    Where end devices will be connected : ise,ubuntu,win10
    Will it be connect to switch 9300 ?

    • Leon
      June 4, 2020 at 18:32

      End device is a source or destination device in a networked system.
      It may be connected to switch 9300.

  12. Caesar
    June 5, 2020 at 12:52

    Please share the scenarios for dual hub dmvpn
    Thanks in advance.

  13. Genesis
    June 6, 2020 at 07:53

    What is the Cisco Digital Network Architecture (Cisco DNA)?

    • Stanley
      June 7, 2020 at 07:55

      Cisco Digital Network Architecture (Cisco DNA) is Cisco’s architecture for enterprise networks – across the campus, branch, WAN, and extended enterprise. It provides an open, extensible, and software-driven approach that makes the network simpler to manage and more agile and responsive to business needs. Cisco DNA is an intelligent system that encompasses policy, automation, analytics, and open platform capabilities to deliver on all required aspects of an intent-based network.

  14. Alfie
    June 6, 2020 at 15:07

    I am going to make a study material for Enterprise Infrastructure v1.
    Please share the raw materials.

    • Ihsan
      June 8, 2020 at 10:03

      Sounds interesting.
      Waiting for it.

    • Antonio
      June 9, 2020 at 08:16

      Good initiation.

    • Emiliano
      June 11, 2020 at 21:20

      Yes we can do it together.

  15. Jeremy
    June 6, 2020 at 19:18

    Please explain the extranet in mpls.

    • sawyer
      June 7, 2020 at 16:16

      MPLS supports intranet and extranet VPNs: MPLS Intranet VPN: this is a VPN where we connect the headquarters, remote sites, branch offices, etc. from a single company. MPLS Extranet VPN: this is a VPN where we extend connectivity from a company to other parties like customers, suppliers, or partners.

  16. Etsuko
    June 7, 2020 at 08:01

    There is new topic added in EI which is RESTCONF & NETCONF.
    Can anybody tell me about it.

    • Christopher
      June 9, 2020 at 14:33

      RESTCONF provides a programmatic interface based on standard mechanisms for accessing configuration data, state data, data-model-specific Remote Procedure Call (RPC) operations and events defined in the YANG model.

      NETCONF is a protocol defined by the IETF to “install, manipulate, and delete the configuration of network devices”. NETCONF operations are realized on top of a Remote Procedure Call (RPC) layer using an XML encoding and provides a basic set of operations to edit and query configuration on a network device.

    • Henry
      June 10, 2020 at 10:21

      The NETCONF capabilities allows to discover all the NETCONF server capabilities: NETCONF version, datastores, supported YANG models, feature, deviation. YANG1.1 requires that A NETCONF server announce the modules it implements with the YANG module “ietf-yang-library”

      With RESTCONF, the server lists each YANG modules, deviations, features it supports using the “ietf-yang-library” YANG module, defined in ietf-netconf-yang-library.

  17. Ayberk
    June 8, 2020 at 10:06

    An Error is occurring when one end is pvst and other end is rstp.

    What can be done to resolve the issue?

    • Owen
      June 9, 2020 at 17:01

      What error you are getting?

  18. Canan
    June 8, 2020 at 13:05

    Pls share the types of questions for lab exam section 5 which is automation.

  19. Ichigo
    June 8, 2020 at 16:13

    Please share the section 5.3 XML topics.

  20. Tery
    June 9, 2020 at 06:10

    Anybody has any practice lab for EI pls share

  21. Damiano
    June 9, 2020 at 11:09

    What is the role of python in ccie ei lab?

  22. Hamako
    June 9, 2020 at 18:16

    There is a topic of Multicast Multipath in CCIE EI.
    Can anybody explain it?

  23. Lincoln
    June 10, 2020 at 10:17

    What are the types of LSA?

    • Hakan
      June 9, 2020 at 06:13

      CCNP level
      There many types of LSA
      LSA 1-7 are in use ( LSA 6 is for multicast)

  24. Edward
    June 10, 2020 at 21:27

    Did anyone attended the ccie certification webinar?
    Please share the details.

    Thanks in advance.

  25. Gerry
    June 13, 2020 at 07:24

    Dual DMvpn scenarios available anywhere ? with example labs ?

  26. KOKO
    June 13, 2020 at 14:38

    Does anybody knows any idea about re-opening of exam centers

  27. Lions
    June 13, 2020 at 21:28

    EI practice lab available ??

  28. koron
    June 21, 2020 at 02:01

    Still not available.
    Did anybody checked .?

  29. Rouf
    June 21, 2020 at 20:14

    Can anybody share docs on Section 5 …. Integration Automation & Programability

  30. Damiano
    June 23, 2020 at 10:15

    CCIE Enterprise Infrastructure practice lab is available.
    Check out the link below:


    • Abhi
      June 25, 2020 at 14:24

      Thanks, i registered and downloaded the EI lab , its good

  31. Tido
    June 24, 2020 at 10:04

    I checked the CCIE EI lab on certbits but was not allowed, needed to register. Then I register and the link was visible.
    I found that the lab is launched by ccielabcenter.
    And registration on certbits played a good role as there are lots of new updates all about ccie and other technologies

    • Olum
      June 25, 2020 at 14:26

      I totally agree with you

  32. Mordek
    June 25, 2020 at 14:27

    many thanks to whoever made this CCIE EI lab,
    now we are available with atleast some stuffs to practice on rather than sitting ideal

  33. Baddy
    June 25, 2020 at 18:07

    Can anybody share images for setting up the above shared lab.
    Thanks in advance.

  34. Felipe
    June 29, 2020 at 05:19

    Thanks a million Damiano for sharing the lab. I found many new updates on certbits. Good stuff.

  35. Grey
    June 29, 2020 at 10:32

    Waiting for images.

  36. Kim
  37. Tibet
    June 30, 2020 at 13:01

    SDWAN Viptela images pls share

  38. Anonymous
    July 2, 2020 at 05:47

    Why is power button available on routers and not available on switches?

  39. Juan
    July 3, 2020 at 07:14

    I also have same question in my mind but no answer.

  40. MJ
    July 4, 2020 at 06:10

    Any news for opening of exam centers?

  41. Edson
    July 5, 2020 at 06:35

    Cisco has updated on 18 June, exam centers keep closed through July till further notification.

  42. Jose
    July 8, 2020 at 08:07

    Lets discuss about the VLAN technologies in CCIE EI

  43. Ricardo
    July 9, 2020 at 06:39

    Access ports

    An access port is a connection on a switch that transmits data to and from a specific VLAN. Because an access port is only assigned to a single VLAN, it sends and receives frames that aren’t tagged and only have the access VLAN value.

  44. Steve
    July 10, 2020 at 07:48

    Trunk ports

    Unlike an access port, a trunk port can transmit data from multiple VLANs. If you have a dozen VLANs on a particular switch, you don’t need additional cables or switches for each VLAN—just that single link. A trunk port allows you to send all those signals for each switch or router across a single trunk link. In contrast to an access port, a trunk port must use tagging in order to allow signals to get to the correct endpoint. Trunk ports typically offer higher bandwidth and lower latency than access ports.

  45. Jobim
    July 12, 2020 at 02:32

    Any news for exam centers re-opening ?

    • Hamil
      July 12, 2020 at 18:04

      No , not yet any news

    • Younes
      July 13, 2020 at 05:59

      No updates regarding re-opening of exam centers.

  46. Numin
    July 19, 2020 at 19:49
    • Jey
      July 22, 2020 at 17:29

      any free books available ?

  47. broad
    July 20, 2020 at 06:27

    did anybody solved the clc ccie ei practice lab v1.0 ?

    pls share

  48. Fateh
    July 22, 2020 at 06:37

    Anybody please share BGP videos.

  49. Rohn
    July 22, 2020 at 17:25

    Can anybody pleas share the process for installing clc ccie ei practice lab v1.0 on eve-ng


    • Jarom
      July 24, 2020 at 05:33

      1. Download VMware
      2. Install eve-ng vm(u can download eve ng from eve-ng.net website)
      3. After installing eve-ng start the VM.
      4. After the VM instance starts u will be able to see an ip address on the VM screen.
      5. Copy and paste that ip address on mozila fire fox or anyother browser.
      6. Then U will be able to see eve-ng screen on the browser.
      7. There find an option to upload the lab.
      8. After uploading Click Open then u can start devices one by one or altogther at once.
      Note: To start your lab you need images. Process of uploading images you can refer eve-ng website.”How To”.

  50. Rapif
    July 25, 2020 at 06:00

    This is the procedure to make vManage act as a CA server


Comment pages
1 2 3 4
  1. No trackbacks yet.

Leave a Reply

Your Details will Not be published